Soldering Irons are a must have for any electronics technician or engineer. Soldering irons are essentially used to join electronic components to the circuit board. They are ranked based on power, tip quality,tip size and sensitivity of temperature dial. So check out this list of 10 best soldering Irons and pick your favourite one.
10. Weller WD1001 95w/120v (366$)
Pro
- High power of this iron means it will heat up quickly.
- Iron is programmable, with instructions such as temperature standby, lockout, set-back, and offset.
- Heating filament is incorporated within the handle allows you to change the tip where heater stays intact.
Con
- Comparatively Expensive.
- WMP build is poor
You can get one here
9. Zeny® 2 IN 1 SMD HOT AIR REWORK SOLDERING IRON(59$)
Pro
- Iron is coupled with a hot air gun.
- Extra heating element is provided
Con
- Unit lacks documentation
- Temperature dial could be more sensitive.
You can get one here
8. Weller WLC200 80-Watt Stained Glass Soldering Station(66$)
Pro
- Very Lightweight.
- Good 80watt power rating , quicker heating up of the filament.
Con
- The tip is 3/8″ , which is pretty big.
- Base station is not of standard quality and is known to fail.
You can get one here
7. Kohree® 110V LED Digital 858D SMD Hot Air Rework Station Solder(59$)
Pro
- Auto-cooling functionality.
- Air flow can be controlled.
Con
- Low quality manufacturing.
You can get one here
6. Kendal 853D 4 IN 1 SMD HOT AIR REWORK & SOLDERING IRON STATION(140$)
Pro
- The station comes with DC power supply & DC Test meter.
- Lead free soldering and de-soldering possible.
Con
- The unit is not as durable as it should be.
You can get one here
5. X-TRONIC – MODEL #5040-XTS(230$)
Pro
- State of the art all things included base station.
- A 70W iron.
Con
- The unit requires assembly without any manual.
- Tip does not heat up very well.
You can get one here
4. Kendal 947D(54$)
Pro
- Very affordable
- Thin tip up to 0.2mm dia,extra tips also included.
Con
- Low poer rating at 45W, heats up slower.
- Temperature control range from 250-400 degree Celsius
You can get one here
3. Hakko FX888D-23BY(96$)
Pro
- 70W+ power
- Owners Manual available.
Con
- Temperature reading is not accurate.
- Only 5 preset temperatures
You can get one here
2. Weller WESD51(119$)
Pro
- Good temperature control range 350F-850F
- Auto power off after 90min
- Temperature setting can be locked, thus making it suitable in continous soldering operations.
Con
- The station is poorly built.
- Works only on 110v
You can get one here
1. X-TRONIC” MODEL #4010-XTS(90$)
Pro
- One Most popular soldering Iron models .
- 65W power.
- Many extra’s available with in the same price,thus gives best value for money(magnifying glass,lamp).
Con
- Manufactured in China , product quality may vary.
You can get one here