What are the best digital vernier calipers?
Digital Vernier Calipers are an essential for an engineer. Precise measurements are a must at Industrial level and a good caliper will provide just that. Ideally vernier calipers measures length/ diameters up to 0.01mm or 0.0005 inches, in case any even more resolution is required, micrometer screw gauges are used. From measuring diameter of pipes to judging depth of holes vernier calipers are perfect. There are 2 types; one where you have to read the readings manually others have a digital sensor which displays values on a LCD. Due to the popularity of the digital ones over manual we decided to write this article, principally based on customer reviews and personal experiences. So check out this list of 10 best digital Vernier Calipers and let us know your favourite digital vernier caliper in the comments section below.
Vernier Caliper by Generic(13$)
Pro
- Large and easy to read LCD display.
- Base measuring function: Inside, outside, depth and step measuring.
- Small locking thumbscrew is also present which locks the jaws in place.
Con
- Can not be used manually if the battery is dead.
- Low-quality build, known to get dysfunctional easily.
You can get one here
Fowler 54-101-150-2 Xtra-Value(35$)
Pro
- Can show inch and metric units for versatility.
- Comes with a case and a spare battery
Con
- No off button, auto off only.
You can get one here
Digital Caliper – ML Tools Stainless Steel(28$)
Pro
- Zero setting at any position, easier to take relative readings.
- 1.5V spare batteries included.
Con
- Inconsistent measurements.
- Defective assembly, grinds and squeaks when jaws are made to open.
You can get one here
Bestpriceam (TM) Vernier Caliper(7$)
Pro
- Very affordable.
Con
- Made from a cheap plastic material.
- Spare batteries are not included.
You can get one here
Top 10 Suggested Articles
10 Famous People With Weird Business Cards
10 Best Microcontroller Boards For Hobbyists And Engineers
10 Ways To Use WD-40 Around The Home That You Wish You Knew Before
Capri Tools CP20001 (19$)
Pro
- You can easily navigate with a one-touch button to change between inches, mm and inch-fractions.
- LED present to indicate low battery life.
- 1 year warranty against any defects from the manufacturer.
Con
- Internal jaws use for measuring have a gap between them.
- Battery consumption is too fast.
You can get one here
Carrera Precision CP9806-TF(30$)
Pro
- Has a heavy duty Titanium head with stainless steel body.
- Easy adjustment with a thumb wheel.
Con
- Uses it’s zero reading during measurement.
- Changing battery is not very easy.
You can get one here
iGaging IP54(29$)
Pro
- Water,oil and dust resistant material.
- Can display in decimals and as well as fractions.
Con
- Tendency to drain batteries while off.
You can get one here
Neiko 01407A Digital Vernier Calipers(18.30$)
Pro
- Accurate Calibration.
- Very Versatile and easy to use.
- Good assembly.
Con
- No auto on feature when we start moving the slider.
You can get one here
Mitutoyo 500-196-30 Digital Vernier Calipers(116$)
Pro
- Manufacturer in Japan , has a high-quality build.
- Consistent readings.
- Provided batteries last a very long time.
- Ideal for industrial use.
Con
- Comparatively expensive
- No auto off feature.
You can get one here
SE 784EC Digital Vernier Calipers(12.36$)
Pro
- Very popular and cost effective option.
- Certified calibration.
- Zero button for relative readings.
- Manual provided.
- Depth measuring blade
Con
- Battery life is small.
You can get one here