Contractors and workers usually use these products for lifting and hanging drywalls. They are the best thing for carrying and lifting dozens of sheets.
The following article lists the 10 best Drywall Lifters that you can buy today at incredibly cheap rates.
10. Goplus Drywall Lifter ($129.99)
This drywall lift panel can host 4 x 16 inches sheet weighing a maximum of 150 lbs. The unit can be lowered to 34 inches off the floor for easy loading of the panel. The 5-inch caster wheel makes it easy to adjust according to the wall. The maximum height which the unit can achieve is 11 inches plus panel. However, for an angled ceiling, the height goes up to 15 inches. It has an integrated winch with brake. With its sturdy and well-built construction, the unit is quite stable.
Available here.
9. Panellift Drywall Lifter ($1299.99)
This drywall lifter is manufactured in the USA and has a 200-pound load capacity. It has a loading height of 36 inches. The torque limiter prevents overloading for enhanced safety. The tripod has a larger footprint for added security. The winch handle is in the center column, making more room for a man to stand and operate it.
“I hang drywall for a living. A must have. Very well built. I had the cable version for ten years and decided to upgrade.” – Amazon’s Customer Review.
Available here.
8. Star K Drywall Lifter ($135.95)
This 11-inch rolling unit is crafted from extra-duty, welded steel and can lift panels up of the size 4’ x 8’, with a maximum load of 150 pounds. The wide tripod stand is supported by anti-slip, non-marring casters that won’t damage the floor. The unit features 9’ reach for flat ceilings and over 11′ range on angled ceilings. The cradle rotates 360°, tilts 65° forward/backward and 10° side-to-side for use on both flat and sloped ceilings. It has rubber caps on three positions for the auto-locking trigger to protect the sheets. It is easy to operate and incredibly easy to assemble.
Available here.
7. Arksen Drywall Lifter ($145.99)
This drywall lift panel can hoist a drywall up by 11 inches possessing a maximum load of 150 lbs. The rolling caster wheels make it easier for the sheet to adjust according to the ceiling. The unit can tilt 65 degrees laterally for easy loading and installations on sloped ceilings. It features a high-quality, heavy-gauge steel construction. It has a single stage lifting mechanism with a break. The product is ideal for home and commercial use.
“Awesome product. I was given an estimate by a local contractor to drywall my room addition. I made a cost comparison, and I could buy this machine and all material for less than half of his estimate. So I did and let me tell you. I was able to drywall my ceiling and walls with 1/2″x4’x8′ and 1/2″x4’x12′ drywall by myself, and it looks great. This machine is well worth the investment.” – Amazon’s Customer Review.
Available here.
6. Telpro Drywall Lifter ($775.00)
This drywall lifter can be assembled and disassembled within seconds and can also fit in a car trunk. The tilting cradle brings loading height down to 34 inches for easy installation of drywall to walls; sloped or level ceilings up to 11 foot tall. The 5-inch castor wheel ensures easy portability and smooth transport over rough floors. A maximum load rating of 150 pounds is given for this unit.
“I am currently acting as my general contractor for the construction of my home. Along with the plumbing, electrical and heating and air I decided hanging drywall would be a good place to trim off some labour cost. There is no way I could have done it by myself without this product. I have also used it to install six large (80″x36″) fixed glass windows that would have been impossible without it.” – Amazon’s Customer Review.
Available here.
5. Red Line Drywall Lifter ($159.99)
This 11-foot drywall lift panel hosts a jack. It allows one-person operation and has a welded steel construction for a durable and sustainable fit. It allows tool free assembly and breakdown and has 5-inch rolling casters for a smooth commute.
Specifications By The Manufacturer:
- Max reach for horizontal ceilings: 11-feet
- Max single sheet capacity: up to 4 x 16-feet
- Max load rating: 150-lbs.
- Tilts 65 degrees laterally
- Max Reach for walls: 15-feet (11-foot maximum lift and half the length of drywall)
“I was a little nervous because of some of the reviews about this product, but it arrived fast, it was easy to put together, and it will easily lift a sheet of drywall to the ceiling and hold it while it is being screwed in place. I’ve been using it with 12 foot 1/2 inch sheets, and it works great. Beats the heck out of holding the sheet on top of my head while my wife complains and struggles with the other end!
The fit and finish are not perfect, but it was a drywall lift for $180ish dollars. It lifts drywall, and it does that well, that’s all I need it to do.” – Amazon’s Customer Review.
Available here.
4. Best Choice Products Drywall Lifter ($145.95)
This lift panel comes with sturdy welded construction and 5-inch caster wheels for easy rolling. The built-in winch brake provides enhanced protection, and the unit has a capacity of 4′ x 16′ sheet and 150 lb load capacity. It features a quick and easy assembly. The unit can reach 15 feet in case of angled ceilings.
“Don’t let the price or minimal reviews scare you off. This lift is better quality than any of the rentals I have used.
I am a general contractor with 30 yrs experience in residential and commercial construction, and I would recommend this product for DIYers and professionals. The shipping was excellent. It arrived two days early and took me about 10 minutes to set up. I have rented several of these over the years, and this one is just as good as any rental and in most cases better since so many before I haven’t abused it. I also ordered a “Pentagon” extension to do 15-foot ceilings, and although I found that my maximum height with the extension was 14′ 8″, it fit perfectly into this lift and worked great. I almost didn’t buy this because it had so few reviews and the price was so much lower than other vendors, but I am glad I took the chance. Great price! Great tool! Excellent delivery time!” – Amazon’s Customer Review.
Available here.
3. GypTool Drywall Lifter ($134.99)
This heavy duty drywall lifter panel can reach for 11-foot flat ceilings and over 13-foot angled-ceilings. It also comes with an integrated extra-strong lifting cable and brake. It features a quick free setup and one man assembly. The primary lift design is excellent. It is built for professionals from heavy-duty all-welded steel.
“Here is the deal.
It’s rickety, wobbly and awkward. But I’ll tell you what, its cheap and it works. For the price, I couldn’t be happier. One person can toss up a 1200 sqft ceiling in a day. It’s crazy how much of a difference it makes. I should have bought this years ago. For the price its one of the best tools I have ever purchased. Any nitpicks over quality, or fit and finish are out the window. At these prices, if it works at all it’s a steal. And this works well!” – Amazon’s Customer Review.
Available here.
2. Pentagon Drywall Lifter ($249.99)
This 11-foot drywall lifter can easily be assembled and operated on by a single person. This unit can easily lift drywalls up to 11′ – 15′ on angled ceilings. It has outriggers for added stability and has a load capacity of 150 lbs. The product features excellent quality.
“This product is just as it was described and exactly what I was looking for. It is easy to assemble and disassemble. It is very easy to use and takes the strain off of lifting the sheetrock. This lift allows you to install drywall all day all by yourself. The crank wheel allows you to stop and hold the drywall exactly where you want it. It is made of quality durable materials. You won’t find this on harbour freight.” – Amazon’s Customer Review.
Available here.
1. Tool Crib Drywall Lifter
This professional 11-foot drywall lifter comes with 5-inch caster wheel for smooth commute over rough surfaces. This drywall lift eliminates the risk of lifting and harming yourself by hand. It has a welded steel construction and a single stage winch brake. You do not require any tools to assemble, and the unit is portable (can fit in a trunk). The lateral tilting makes it easy to install drywall on sloped ceilings. The support hooks prevent the sheet from rolling out of the lifter, and the rubber feet with backstop keeps your lift in place while loading.
Specifications By The Manufacturer:
- Max reach for horizontal ceilings: 11 feet
- Max single sheet capacity: 4-foot x 16-foot
- Max Reach for walls: 15 feet
- Max load rating: 150-pound
“I have never used a hanging helper before but I can say putting 12′ sheets on a ceiling is now a one man job. Ceilings are now trivial as long as you have some floor space to work with. Walls I still have not figure out completely. This still looks like a two person job, especially if you have any receptacles to align. You can do 12′ horizontal runs with one person, but it is slow and painfully alone. The operation is smooth and stable. It breaks down into five large pieces for storage.” – Amazon’s Customer Review.
Available here.
We would appreciate your valuable feedback in the comments’ section below.