Site icon Wonderful Engineering

10 Best Gas Leak Detectors That Every Field Engineer Should Have – 2019

Gas detectors are useful for both home and Industrial use but in different domains. In the industry they are used to detect very minute leaks or fluctuations in pressure levels of various gases whereas in home they mostly check the presence of one or two gases for a certain level of toxicity. So check out this list of 10 best Gas Leak Detectors and let us know your favourite gas leak detector in the comments section below.

10. General Tools & Instruments PNG2000A Natural Gas Detector Pen(37$)

A rudimentary tool to detect potentially hazardous gases. This tool is easy to use for a mechanic or a safety inspector because it comes pre-calibrated.
You can get one here

9. Family Safety Products 8910012 Safety Siren Combustible Gas (Propane Methane) Detector(56$)

A gas detector which is good for Methane and Propane. This unit also has self-diagnostic feature but we can not comment on its usefulness.
You can get one here

8. BLUBOON(TM) 808L Plug-In Combustible Gas Detector(12$)

A simple combustible gas detector.Very affordable and has a good display but lack any serious features for robust use.
You can get one here

7. Ridgid 36163 Micro CD-100 Combustible Gas Detector(147$)

Rugged ergonomic design makes it capable of withstanding job site rigor.Tri-Mode Detection gives the operator the flexibility to be alerted with a visual, audible or vibration alert.
You can get one here

6. Inficon 718-202-G1 Gas Mate Combustible Gas Leak Detector(162$)

The sensor is sensitive to 5ppm Methane. Also detects natural gas, propane, butane, cyclopentane, ethane, ethanol, isobutane and ammonia. Multiple LEDs are also present with a variable intensity audio alarm to  indicate leak strength.
You can get one here

5. Universal Security Instruments MCND401B M Series(31$)

Not technically industrial level equipment. The Universal Security Instruments Electric MCND401B Plug-In Carbon Monoxide and Natural Gas Smart Alarm is a 2-in-1 device that provides double the protection with a single installation. This dual-sensing alarm protects against two deadly household threats: carbon monoxide and natural gas (or methane). Perfect for new or replacement installations, the 120-volt AC alarm is suitable for houses, apartments and mobile homes.
You can get one here

4. Extech EZ40 EzFlex Combustible Gas Detector(106$)

Gas detector with very good sensitivity. As per manufacturer “Visible and audible alarm at 10% LEL for methane”. The Extech EZ40 has a 406mm (16 inch) flexible, goose neck that allows access into hard to reach locations and provides simple one-handed operation with a thumb controlled sensitivity adjustment.
You can get one here

3. Amprobe GSD600 Gas Leak Detector(174$)

A detector for specifically detecting Methane and Propane. Also has an auto-calibration facility at start-up which helps accuracy.
You can get one here

2. Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm(50$)

A detector for your home. If you are worried that there might be a build up of toxic gases in your home due to the heater running in the harsh winters, then this piece of equipment is ideal for you. As per manufacturer””Kidde’s carbon monoxide alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards.
You can get one here

1. UEi Test Instruments CD100A Combustible Gas Leak Detector(154$)

Most popular Industrial scale combustible gas detector on Amazon.com. Features include a long 18-Inch gooseneck for hard to reach areas and can detect methane levels as low was 50ppm.
You can get one here

Exit mobile version