Why do Tire Rims Have Holes In Them? Here Is The Technical Reason

Tire rim holes

So you would rather have tires as an entire slab of metal? Interesting. I wonder if the idea inspired by the initial wooden wheels. Because even they realized they shouldn’t use the entire wooden slab as the wheel, no matter how heavy the cart it needed to pull.

Credits: Keywordsuggests

The transition shown above was made considering the fact that slab-wheels, as I would like to call them, increases the weight while the whole purpose of the spike-centered wheels, also what I like to call them, is to evenly distribute the weight of the cart along with reducing the weight of the wheel itself.

Credits: Tumblr

Why? You may ask. The holes in the tires are there to reduce weight, Moreover,  The Suspension system of the entire vehicle that the tire is supporting will function efficiently if the mass of the tire at resting position is kept to the minimum. It is important to notice that creating lightweight tires will make the car run more smoothly too!

We compared the moment of inertia from a rotating object to the moment of inertia of a resting object. Given that the moment of inertia is dependent on the mass of the rotating object and the radius of the rotating object.

Inertia I=mr^{2} usually for a solid disk becomes I_{z}={\frac {mr^{2}}{2}}\,\! for a hoop, a thinner structure. Hence, the resistance of gravity has been reduced to half resulting in a significant smoothness in the rotation of the tires.

Credits: Kickstarter

Another minor factor here is angular momentum. The lesser the weight of the rotating object, the lesser the inertia of the tires which will reduce the angular momentum. When the car is turning, the conservation of angular momentum will cause the body of the car to move away from the turning direction. The weight reduction will help lower that angular moment to avoid any incidents of body roll when turning the corner. Hence, making the lighter tires allows weight reduction and is cost effective.

Another utility of these holes is that they help with ventilation. They exist to allow proper airflow to cool the brakes.

4 comments

  1. Benjamin Schoop Reply

    Also if using the terminology of wheels and rims is your only problem, then why say the whole thing is inaccurate? You know this is all 100% accurate information for the technical inquiries.

    • Jim Smith Reply

      Yes, Someone that does not know the difference between tires and rims calls everything they post into doubt. Too bad that you are unable to grasp that concept.

  2. Jim Smith Reply

    Obviously, you do not know the difference between tires and the rims (wheels on which the tires are mounted. The holes are there to reduce the weight. But there have been and still are, steel rims with no holes. You might also note that the holes do aid in cooling the brakes. Wire rimes, still available for many cars are also intended to reduce weight and aid in brake cooling. This post was so inaccurate that it is a disgrace.

    • Benjamin Schoop Reply

      Cool the brakes you say? You mean like the final paragraph states? Hmm you’re right this is inaccurate because it worded what you said differently!

Leave a Reply

Your email address will not be published. Required fields are marked *