Site icon Wonderful Engineering

10 Best 3 Phase Rotation Testers

What is a 3 phase rotation tester? It is a device that can tell you if the phasing is clockwise or anti-clockwise. Most 3 phase rotation testers come with same functions, but you can look for the best 3 phase rotation testers depending on the type or tester that you require. This article includes a list of the 10 best 3 phase rotation testers,

10. Fluke 3 Phase Rotation Tester ($199.99)

Image Credits: Amazon

This 3 phase rotation tester is used to measure phase rotation in all the areas where 3 phase supplies are used to feed motors, drives and electrical systems. It is a rotary field indicator which provides a clear indication of the 3 phase on an LCD and a phase rotation direction to determine correct connections. It allows rapid determination of phase sequence and has a voltage up to 700 V and a frequency range suitable for commercial and industrial applications. This 3 phase detection system doesn’t require any batteries. It is highly water and dust repellent and comes with a two years warranty.

Available here

 

9. Leaton 3 Phase Sequence Presence Rotation Tester ($17.99)

Image Credits: Amazon

This 3 phase rotation tester is used to measure the opening phase condition and sequence. The indication is given on a clear LED, and a buzzer also sounds. It has a frequency range of 20Hz to 400Hz. The red, green and yellow lights indicate the buzzer. It is a unit which can perform two functions which are an open phase indication and a phase rotation indication. This device gives you a fast and accurate measurement.

Available here

 

8. Mastech 3 Phase Rotation Tester ($32.99)

Image Credits: Amazon

This is a 3 phase rotation tester with an operating voltage of 120V to 400V AC and a frequency range of 2Hz to 400Hz. This device is powered by a 9V battery. This motor and phase rotation indicator is a handheld, battery-operated instrument designed to detect rotary field of 3 phase systems and determine motor-rotation direction. This device comes with three test leads, three alligator clips, a 9V battery, a user’s manual and a case to carry it around safely.

Available here

 

7. Atoplee 3 Phase Sequence Presence Rotation Tester ($17.99)

Image Credits: Amazon

This 3 phase rotation tester uses a limit support voltage of 2000 V/min and operates at a frequency range of 20 Hz to 400 Hz. Its length of test leads is approximately 1 meter long, and it comes with a protection level of 2000 V. This device is designed to have a limited time for continuous use, that is, 60 minutes maximum at 60V AC and 4 minutes maximum at 600V AC.

Available here

 

6. Bestdo 3 Phase Sequence Rotation Tester ($18.45)

Image Credits: Amazon

This 3 phase rotation tester is made from high-quality material for added durability. It is a highly reliable device which can check a large range of 60V to 600V AC 3 phase. It is a single unit that can not only check the phase sequence but also show if the phase is open or not. It is a small, lightweight and portable device with dimensions, 3.35″ x 2.52″ x 0.91″.

Available here

 

5. IDEAL 3 Phase Motor Rotation Tester ($135.50)

Image Credits: Amazon

This 3 phase rotation tester is used to identify 3 phase sequence and to indicate motor rotation. It checks for open phases. This device is designed for use up to 600 V. This equipment is completely safe to use as it meets IEC-1010 (EN61010) safety requirements.

Available here

 

4. Kiamitor 3 Phase Sequence & Motor Rotation Tester ($25.44)

Image Credits: Amazon

This 3 phase rotation tester has a measuring frequency range of 20Hz to 400Hz and comes with an operational voltage of 60V to 600V. It is used to measure the opening phase condition and sequence. The results are shown on a bright LED, and an audio indication is also given through a loud buzzer. This device gives you exact and precise measurements in no time. The manufacturer offers a 1-year warranty with this device.

Available here

 

3. MagiDeal 3 Phase Sequence Rotation Tester ($19.99)

Image Credits: Amazon

This device comes with a measuring frequency range of 20Hz to 400Hz. It is equipped with red, green and yellow lights and a buzzer which indicate the opening phase condition. The operational voltage of this 3 phase rotation tester is 60V to 600V. This device not only gives you an open phase indication but also tells you about the phase rotation.

Available here

 

2. Owfeel 3 Phase Sequence  Rotation Tester ($18.49)

Image Credits: Amazon

This 3 phase rotation tester can measure the opening phase condition and sequence and indicate the status through an LED and a loud buzzer. It features an open phase indication and a phase rotation indication. The frequency range for this device is 20Hz to 400Hz. The indication of an open phase or phase rotation is given through red, green and yellow lights and a buzzer.

Available here

 

1. HQRP 3 Phase Sequence Rotation Tester

Image Credits: Amazon

This device comes with a measuring frequency range of 20Hz to 400Hz and an operational voltage of 60V to 600V. This 3 phase rotation tester can be used to measure the opening phase condition and alert you through a buzzer and display the measurements on a clear LED. This equipment comes with a 200 days warranty.

Available here

 

Exit mobile version